When a brand asks our sales desk for a coated tablet quote these days, they get two numbers back: one for the classic bright-white coating we used for years, and one for a coating with no titanium dioxide in it. That is not upselling. It is the direct result of the EU removing titanium dioxide …
When a brand asks our sales desk for a coated tablet quote these days, they get two numbers back: one for the classic bright-white coating we used for years, and one for a coating with no titanium dioxide in it. That is not upselling. It is the direct result of the EU removing titanium dioxide (E171) from its list of permitted food additives. Our customers who already sell – or plan to sell – in Europe cannot simply default to the old formula anymore, and the two quotes make the choice explicit instead of hiding it six months later at a border.
This is what actually changed on our line, why nothing fully replaces titanium dioxide, what the two-quote system looks like in practice, and the checklist we now run before any coated tablet leaves the Dongying plant.
What actually changed
Titanium dioxide was the cheapest, most reliable way to make a tablet look the way consumers expect: opaque, uniform, and genuinely white. It covered the grey, brown or beige core of an active ingredient, it made debossed logos and small print readable, and it did all of that at a very small addition rate. Because it was so good and so cheap, coating used to be almost an afterthought. For years roughly nine out of ten of our white tablets shared a single coating formula, and nobody asked which market it was heading to.
The EU’s decision to drop E171 from the permitted additive list changed that overnight. For any tablet that may enter the European market, we no longer default to a titanium dioxide-based coating. Suddenly the coating is not a cosmetic detail – it is a market-access decision that has to be confirmed before we even fix the formula.
Why nothing fully replaces it
Titanium dioxide was quietly doing three jobs at once: hiding the core (opacity), delivering brilliance and whiteness, and achieving that coverage with very little material. Every replacement is a trade-off, not a like-for-like swap. In our coating trials the realistic options behave like this:
- Calcium carbonate: strong opacity and relatively low cost, but it can look slightly chalky, it does not like acidic actives, and it usually needs a heavier coat to match TiO2‘s hiding power.
- Starch-based (e.g. rice starch) films: a clean-label story and easy to declare, but lower opacity and a thinner, less “premium” appearance unless you build up the coat.
- HPMC-based film with mineral opacifiers: the option we steer EU-bound, plant-based work toward because it supports vegan claims as well – but it runs a longer coating cycle and costs more per tablet.
The practical consequence: a titanium-dioxide-free white tablet is achievable, and we make them every week, but it is not free and it is not always visually identical to the version a brand approved two years ago.
The two-quote system, honestly explained
Instead of guessing, we send two quotes and tell the client which markets each one is cleared for.
- Quote A – titanium dioxide based: for markets that still permit it. We will quote it, but we flag clearly that we do not recommend it for EU/UK-bound supply.
- Quote B – titanium dioxide free: the EU-ready coating, built on HPMC plus mineral opacifiers, suitable for vegan positioning.
The titanium-free option costs more per tablet. The opacifier load goes up, the coating run takes longer, and sometimes we lose a little brightness that we then recover elsewhere in the formula. I will not pretend there is a single number that applies to everyone – it depends on tablet size, core colour and how white you need it – but in our experience the gap on large orders is small compared with the cost of a rejected container at the EU border. That is the whole point of quoting twice: it turns a hidden compliance risk into a line item you can decide on.
Market-by-market coating decisions
This is the table our project managers actually work from when a coated tablet is ordered:
| Target market | Default white coating | What we check before we commit |
|---|---|---|
| EU / UK | Titanium-dioxide-free (HPMC + mineral) | Vegan-compatible film if a vegan claim is made; claims checked against the EU register |
| USA | Titanium dioxide permitted, subject to US colour-additive rules | Colour-additive declaration and label panels consistent |
| Southeast Asia (Halal-sensitive) | Titanium dioxide generally fine | Film ingredients must be Halal-compatible; market labels (e.g. BPOM, Halal) confirmed |
| EAEU / Russia | Keep the formula stable | Russian-language label is the only mandatory language; batch COA on file |
The 7-point pre-ship checklist for coated tablets
This is the list we run before any coated tablet batch is released. It is short enough to use, and every line has caught a real problem at some point:
- Destination confirmed and TiO2 status flagged. No quote leaves the desk without the target market written on it.
- Coating matched to the claim. A vegan tablet cannot carry a shellac-based glaze; a gummy can carry a pectin base, a bovine softgel cannot claim vegan at all.
- Opacity checked against the core. Dark or strongly coloured actives need a heavier coat to hide – decided before, not after, coating.
- Coating weight vs disintegration verified. More coat for opacity can push the tablet out of its dissolution window.
- Colour signed off on a physical sample, never on a screen or a PDF. Whites drift; eyes on tablets do not lie.
- Colour/additive declarations consistent across all label panels – ingredient list, “other ingredients”, and any front-of-pack claims must agree.
- One coated sample retained per batch for the shelf life, so a dispute three months later has evidence.
Two adjacent traps we have watched clients hit
Coating is rarely the only issue on a tablet file. Two others come up constantly. The first is the vegan boundary: pectin-based gummies can legitimately be labelled vegan, but any softgel made with bovine gelatin can never be labelled vegetarian or vegan, no matter what the marketing team wants. The second is raw-material naming. On one shipment we caught a label that said “coriander essential oil” while the formula called for coriander seed oil – the two are not interchangeable, and that kind of mismatch is exactly what a customs officer or an auditor looks for. We now verify that the ingredient name on the artwork matches the name on the batch COA, character for character.
Why this is a buyer’s problem, not just a factory’s
A coating choice feels cosmetic until it becomes the reason a container sits at a border. Moving a tablet from one market to another is not a matter of reprinting a label – it can mean re-coating, re-testing, and re-quoting. At our plant we run 100 million capsules, tablets and softgels a day across 8 GMP-standard workshops, with tablet minimum order quantities starting at 150,000 pieces, and we cover hard capsules, softgels, tablets, gummies, liquids and powders. We would much rather send you two quotes on day one than one rejection on day ninety.
If you are reformulating for the EU, or you simply want to know whether your current titanium dioxide coating is a risk in your target market, send us the artwork and the destination. We will tell you straight.
Wade@zuoningbio.com | +86 187 5469 6289 | www.zuoningbio.com




